WHAT'S NEW?
Loading...

HOW TO INSTALL GLO BOLT MODEM ON PC

Modem Installation FIRST TIME ACTIVATION

I guess you just bought a new Glo modem and you are also ready with a Glo prepaid SIM also Insert the GLO SIM in the SIM slot inside the modem, and then make a direct connection of the modem to your device(desktop,laptop e.t.c).

Just take a few seconds (lets say 0-30 seconds)to wait and allow the "folder-like" dialogue box to pop up on your device screen or better still dash to “My Computer” (shortcut key Win + E) and double click the glo dongle icon you see Click on the “RUN.AUTO.EXE” in the folder to install the modem on the PC and stick to instructions on the wizard dialogue boxes.

  • you see a pop-up that the device is fully installed and ready to use, then switch over to double-click on the Glo icon on your desktop
  • Watch out for the Glo network signal icon to show up right at the left bottom corner of the Glo software interface/Graphic User Interface (GUI)
  • Click on the “CALL” icon on the GUI, dial/flash any number of your choice to immediately activate your Glo prepaid SIM
  • Click on the “USSD/SELF CARE” icon on the GUI, to input the recharge card PIN ( Do this without "#" or "*") one at a time in the “INPUT RECHARGE CODE” area and left click on the “ACTIVATE/RECHARGE” button.
  • Just Repeat this process until you recharge the account with the corresponding amount of the package of your choice. Close the box when you are done.
  • Click on the “TEXT” icon on the GUI; select the first envelope-like icon with a blue label.
  • On “SEND TO” field, type "127" and then type the appropriate plan code (10 or 11 or 12 etc.) in the body. Click “SEND” button
  • Afer a while you will receive an SMS that shows that your subscription was successful
  • Click on the "VIEW" button to grab full details of your subscribed plan.
  • Click on the “CONNECT” icon on the “TASK BAR”
  • Ensure the “PROFILE NAME” is set at “GLO 3G PLUS (PREPAID)”
  • Click on the “CONNECT” button, once the green and the red arrows come up, you can then open your internet browser and "RULE YOUR WOLRD”!,


RELATED POST: HOW TO UNLOCK YOUR GLO BOLT MODEM

TO CHECK YOUR GLO SUSCRIPTION STATUS
Click on the “TEXT” icon on the Glo modem Software; select the first envelope-like icon with a blue label.
In the “SEND TO” field, type 127 and then type “INFO” in the body.
Click on the “SEND” button and it will display your subscription status.

13 comments: Leave Your Comments

  1. I must have done something wrong. I installed it on Win.7 but it did not work.

    ReplyDelete
  2. You can read carefully all the steps you need to get it in a working state from the instructions above

    ReplyDelete
  3. Pls I av a problem,I jus bought mine and I seem to be havin issues installin it,I initially tried following d manual, it said "1. Insert d modem in usb Port 2. On d install or run program section,click d glo icon.. I made a mistake I clicked on d 'install n run' instead ... And its jus dissapeared n. I can't continue d next instructions... I tried removin d modem to start again, still no response. I await ur reply pls

    ReplyDelete
    Replies
    1. Okay now I think you should do the following
      Insert the modem into any usb port.
      you would be prompted automatically to install the modem
      or open my computer (simply press WIN key + E simultaneously) and click on the autorun.exe to install the Glo modem

      If it doesnt work, then try this solution http://browsingcheat.blogspot.com/2013/05/10-steps-to-troubleshoot-your-zte-or-huawei-or-3g-modem.html
      ...Thanks

      Delete
  4. Pls, I recharged five thousand naira and sent 11 to 127. The message i got was that the data plan is not compatible with your current data package. Pls what does this mean and how do i resolve it?

    ReplyDelete
    Replies
    1. It means the USSD code you sent is Invalid for the Sum you Recharged. for More Info on how to recharge BIS or Data bundles on Glo for an appropriate plan of your choice, check this link
      http://browsingcheat.blogspot.com/2013/05/how-to-subscribe-for-all-new-glo-data-plan-and-bundles.html or better still

      http://browsingcheat.blogspot.com/2013/03/new-latest-blackberry-data-plan-for-glo-users.html For GLO BIS

      I hope it helps

      Delete
  5. plz how to unlocked glo bolt modem to be a universal plz mail me on paulawolola@gmail.com

    ReplyDelete
  6. check the popular post area for solutions

    ReplyDelete
  7. pls my “PROFILE NAME” is not set at “GLO 3G PLUS (PREPAID)” instead it is just GLO BOLT... What do I do pls? And it is not displaying 3g! Just edge

    ReplyDelete
    Replies
    1. it's still very okay if the profile name is set to whatever

      If the 3G is not displaying then you have to do a check on NETWORK settings by clicking OPTION; then navigate to NETWORK and select WCDMA.
      I HOPE THIS HELPS

      Delete
  8. I cracked my glo bolt modem with dc locker successfully, later, i checked some diagnose button on the dc locker software and my glo icon would not respond

    ReplyDelete
  9. anytime i tried to disconnect my glo after browsing the curser will not work on the disconnect button but will work on other icons on the computer

    ReplyDelete
  10. Hello are you a man or a woman ,this is the new cold ,,you can subscribe for free subscription ,,a friend of mine who work in glo office ,,help me ,ever December they is a free 5 months subscription only for Glo network,,,just write your name and your number to this Email address when you are sending your number to the Email address you we also send Glo card 500 two place,and send it.to the email for them to Activate your number for you,,,Enjoy your DECEMBER WITH 5 MONTHS FREE subscription .,

    ReplyDelete

Please Comment and don't Spam